Product material: 

The handle of the blood bag tube stripper is made of aluminum alloy or 304 stainless steel, and the rest of the spare parts are made of 304 stainless steel, reaching the standard of medical devices.

Performance:

1. The handle of the blood bag tube stripper is open in the natural state, and its opening angle is more in line with human sports biomechanics, which makes the operation more labor-saving and convenient.

2. Its shape adopts a round structure design, and the parts' contact with hands is more comfortable. The appearance of the product is sandblasted to achieve the effect of anti-skid when contact with hands.

3. The angle between the roller shaft and the handle of the blood bag tube stripper is more than 90 degrees, which is more in line with the biomechanics of human movement and makes the operation more labor-saving and convenient.

4. The opposite roller of the blood tube stripper adopts the bearing type structure, which is more smooth than the opposite roller of the plastic type.

5. The blood tube stripper is a seamless baffle structure. The upper and lower baffle are designed to be nested. When the stripper is pressed, the whole baffle is an integral structure, which can completely wrap the tube, so that the tube can not be offset, and ensure the effectiveness of use.

Scope of application:

It is used to squeeze the residual blood in the tube during the process of blood preparation.    

Instructions for use:

1. Take out the product from the packing box, check the parts whether they are loose or missing, and check the handle whether they are opened and closed smoothly.

2. Hold the handle with the right hand and hold one end of the guide tube with the left hand. Then place the tube between the counter roller shafts, so that the tube and the counter roller shaft are approximately at a 90 ° angle.

3. Hold the handle tightly to make the tube stuck in the baffle, push the blood bag tube Stripper forward, and pay attention to keeping the 90 ° angle between the tube and the counter roller shaft in the process of pushing forward.

4. After the blood in the catheter is squeezed out, release the handle.

5. If it is necessary to squeeze blood repeatedly, repeat the operation according to 2-4 steps. 

Precautions, warnings and suggestive instructions:

1. The material of the product is safe and pollution-free.

2. The product is a special tool, which can not be used for other purposes except for catheters.

3. Check the product before use, and forbid to use if the parts fall off, shift or defect, or other abnormal conditions are found.

4. Clean the product after use. Wipe the product with alcohol gauze and place it in the packing box according to the product.

5. This product is not disposable and can be recycled.       

Product maintenance method:

1. Check the product before use, and forbid use if the accessories fall off, shift or defect, or other 

abnormal conditions are found.

2. Clean the product after use, wipe the product with alcohol gauze, and place it in the packing box according to the product.

Storage conditions and methods:

The packaged products must be placed in a cool and dry environment without direct sunlight and corrosive gas. It is strictly

forbidden to stack anywhere to prevent moisture. This product should be careful of heavy pressure, direct sunlight, rain, and snow during transportation.

Term of validity:

10 Years