The fiberglass casting tape is made of glass fiber  woven base fabric impregnated with moisture/curing polyurethane.

Product features

Excellent shaping performance

The extensibility of the polymer bandage base material  makes it easier and more perfect for the bandage to  shape the curved part of the limb.

Smooth surface after shaping

The perfect combination of high-quality glass fiber  substrate and special formula makes the bandage  smoother and more compliant during operation,  and the surface is smoother after curing.

Simple and reliable clinical operation

The application of water-active resin makes the  operation of the product easier and also facilitates  the control of the operation time, thereby reducing the  anxiety of the patient and allowing the doctor to  arrange the time reasonably.

Lightweight, breathable,  wear-resistant, waterproof

Light weight, 1/5 of ordinary plaster bandages,  good air permeability, moisture-resistant,  waterproof after setting, convenient for patients to  bathe and move.

Not allergic

Non-toxic, no irritating smell

Instructions for use

1. Choose the product with appropriate specifications  according to the patient's part, and wear latex gloves before use;  2. The parts that need to be fixed are backed with tubular bandages,  and can be covered with cotton rolls when necessary;  3. Soak the unsealed bandage in room temperature water for 3~4 seconds,  then squeeze 2~3 times; If it is not immersed in water, the direct operation time needs to be extended to 4~6 minutes (the curing time of the  product is directly related to the actual water temperature and  room temperature,the higher the temperature, the faster the curing time of  the polymer bandage);  4. Wrap with slight force in a spiral way, with the bandage wrapped around  1/2~1/3 of the patient's area(The winding tightness is moderate,  too loose will reduce the adhesion between the bandage layers,  and too tight will increase the burden on the injured part of the patient);  5. According to the actual situation, wrap 5~6 layers on the supporting parts,  and 3~4 layers on the non-supporting parts(The strength of  the product is related to the number of overlapping layers, and more  overlapping layers will improve the support and strength of the product);  6. In order to increase the adhesion between the layers of the product,  after winding, gently stroke and smooth, and naturally solidify and shape.