Instructions for use

1. Choose the product with appropriate specifications  according to the patient's part, and wear latex gloves before use;  

2. The parts that need to be fixed are backed with tubular bandages,  and can be covered with cotton rolls when necessary;  

3. Soak the unsealed bandage in room temperature water for 3~4 seconds,  then squeeze 2~3 times; If it is not immersed in water, the direct operation time needs to be extended to 4~6 minutes (the curing time of the  product is directly related to the actual water temperature and  room temperature,the higher the temperature, the faster the curing time of  the polymer bandage);  

4. Wrap with slight force in a spiral way, with the bandage wrapped around  1/2~1/3 of the patient's area(The winding tightness is moderate,  too loose will reduce the adhesion between the bandage layers,  and too tight will increase the burden on the injured part of the patient);  

5. According to the actual situation, wrap 5~6 layers on the supporting parts,  and 3~4 layers on the non-supporting parts(The strength of  the product is related to the number of overlapping layers, and more  overlapping layers will improve the support and strength of the product);  

6. In order to increase the adhesion between the layers of the product,  after winding, gently stroke and smooth, and naturally solidify and shape.